Depron Insulation

Highly efficient insulation...

Depron is a highly efficient extruded polystyrene insulation material suitable for use below wood, lamnate or even carpets.

It is available in 3mm or 6mm sheets.

What Is Depron®?

Depron is a millimetre thin insulation sheet manufactured of fully recycled material, free from freon and halogen. The sheet is produced of foamed polystyrene, a material that does not age. The cell structure in the sheet is built up of fine, closed cells that give it its excellent physical and mechanical characteristics.

An Insulation Capacity That Saves Energy

The special cell structure means that the sheet does not conduct heat. Laying Depron on the floor means that heat will instead, be effectively reflected back towards the floor surface. As "waste heat" is taken care of, you utilise energy in an effective manner and thereby lower your energy consumption.

Effective Protection Against Damp and Cold

Depron not only takes care of the heat, it is also an effective guard against the cold and damp. The material is resistant to cement, plaster and most alkalis, however, not against organic solvents. Depron is water repellent – does not rot or go mouldy. In addition the sheets have a sound insulating effect, which makes the floor "quieter" to walk on.

Increase The Effect of the Floor Heating

The insulation sheets are easily laid between the existing floor and the floor heating foil. This gives not only a smooth and protective underlay but also increases the effect of the floor heating.

Technical Data

    * Art. no. Depron Sheet 3mm 6mm
    * Width, length 0,8x1,25m
    * Thickness 3mm & 6mm
    * Coverage area per pack 40 m²
    * Material type Foamed polystyrene
    * Water repellent 100%
    * Density 40 kg/m²
    * Thermal conductivity 0,035 W/mK