Help

If you require further assistance with this product, please contact us by email at:

sales@warmfloorsonline.com

or

FREEPHONE: 0800 0433 195

Product Summary

WarmFloors Carbon Heating Film is designed specifically to go under wood and laminate floors. With a thickness of only 6mm it can be installed under the most restricted of floor heights.

Because every carbon heating system is made to measure we require a simple floor plan before we can design and supply a heating system for your room. If your room is square/rectangular with no obstructions then confimation of the dimension by email will be fine, just quote the order number and the room name plus its internal dimensions to the nearest cm, (e.g. 380 x 460cms - conservatory) and we will place the order with the manufacturer. To work out the size of kit you require simply multiply the length of your room by the width (3.8m x 4.6m = 14.72m²) to get your m² of the room, then select the next kit up, for example if the size of your room was 14.72m² you would need a WFCS15 or if the room was a conservatory you would need a WFCD15 which includes 12mm Depron insulation to help with the higher heat loss. If the room is an irregular shape or has any fixed objects such as kitchen units, fireplaces etc, you will need to provide these on a simple sketch of the room with the dimensions:

This sketch can be emailed, faxed or posted, but please note we cannot start to process your order without a sketch or the dimensions. Carbon film is supplied as standard at 130w per m², but if your room is a conservatory we recommend the higher output 160w per m² and a double layer of Depron insulation.

Please Note:

This product takes 7-10 working days for delivery because it is made to measure

The carbon film system is NOT suitable for installation in a bathroom, this is because its not an earthed product.

Contents

> 1 x Carbon heating roll, size as specified
> 1 x Depron insulating underlay, size to suit
> 1 x Cold cable connectors
> 1 x flush mounted junction box with blank front plate
> 1 x Market leading AUBE-132-F fully programmable digital thermostat
> 1 x Layer of 6mm Depron Insulation
> 1 x PE Barrier
> 1 x Full installation instructions
> Free delivery.

This system comes with a 10 YEAR GUARANTEE.

Installing this System in a Conservatory...

If your installing the carbon film in a conservatory it is recommended that you purchase a system with 12mm Depron insulation (2 x 6mm layers) to combat greater heat loss. Therefore please choose one of the 160W systems found below 130W.

Help

If you require further assistance with this product, please contact us by email at:

sales@warmfloorsonline.com

or

FREEPHONE: 0800 0433 195

Product Summary

This system should be purchased if you are going to install the carbon film in a conservatory.

Contents

> Same contents as previous product but with an extra layer of depron (12mm) and 160W power.